DigiQuenchDOS
Try DOS Book a demo

Home / Solutions / Manufacturing

Manufacturing

AI agents for manufacturing: fewer breakdowns, faster fixes

When a machine starts to fail, every minute counts. DOS AI agents watch every machine around the clock, spot the early signs, find the likely root cause and get the right technician there with the right part, while production moves to a machine that is working.

The challenge

Most breakdowns announce themselves: vibration creeps up, oil runs hot, cycles slow down. But nobody can watch every machine every hour, the repair history sits in a system nobody searches at 3 am, and the first half hour of every breakdown goes on phone calls: who is on shift, who knows this machine, is the part in stores. DOS gives each of those jobs to an AI agent. Agents read your machine data and never control a machine: a stop is always your supervisor's decision.

What you control

  • Read-only on machines: no agent can start, stop or change a machine or PLC
  • Stopping a machine is always the shift supervisor's decision
  • Spare-part orders above your limit wait for the maintenance head
  • Lot holds and customer containment need the quality head
Benefits

Catch faults early

Every machine compared with its own normal behaviour, every few minutes, so warnings come before breakdowns.

Know the cause sooner

The likely root cause, the proven fix and the spare part attached to the job before the technician arrives.

The right person, fast

The best on-shift technician alerted in seconds; no acknowledgement in time means the supervisor knows.

Keep the line moving

Orders moved off a broken machine, material at the line and suspect lots held before they ship.

Why it matters

Unplanned downtime is the most expensive minute in the plant

Published research on what machine breakdowns cost manufacturers.

$1.4 trillion

a year lost to unplanned downtime by the world's 500 largest companies, 11% of their revenue

Source: Siemens, True Cost of Downtime 2024
27 hours

of unplanned downtime a month at an average large plant

Source: Siemens, True Cost of Downtime 2024
$2.3 million

per hour of downtime at an automotive plant

Source: Siemens, True Cost of Downtime 2024
30-50%

less machine downtime from predictive maintenance done well

Source: McKinsey
Machine to fix, minute by minute

From the first abnormal reading to the right technician in minutes

A worked example on sample data: one lathe, six agents, and every risky step decided by a person.

  1. 0 min
    MachineWatch

    Spindle vibration on Lathe 07 passes its limit. The on-call technician is alerted with the reading and the trend.

  2. 1 min
    RootCauseIQ

    Likely cause: spindle front bearing wear, 80% confidence, from 4 of 5 past cases. Proven fix and part attached.

  3. 2 min
    FixDispatch

    The best free mechanical technician on shift gets the job. No acknowledgement in 15 minutes and the supervisor is told.

  4. 3 min
    SpareSense

    The bearing set is not in stores: expedited within the spending limit.

  5. 4 min
    PlanSync

    Orders move to a free lathe. One order cannot make its due time: the planner decides.

  6. 5 min
    LotTrace

    Lots made since the vibration started are held; one already shipped goes to the quality head.

The process, stage by stage

Machine to fix

From the first abnormal reading to a repaired machine and a re-planned line

01Watch machinesMachineWatchGoal: Faults caught before breakdown
02Find the root causeRootCauseIQGoal: Breakdowns with a likely cause
03Dispatch the technicianFixDispatchGoal: Minutes to technician
04Spare parts readySpareSenseGoal: Jobs not waiting for parts
05Re-plan productionPlanSyncGoal: Orders moved off down machines
06Shift handoverShiftBriefGoal: Handovers complete
Second process

Plan to produce

From a released order to good parts, traced and shipped, at the lowest cost per part

01Material to the lineMaterialFlowGoal: Jobs started on time
02Quality in processQualityLensGoal: Drift caught in time
03Trace and containLotTraceGoal: Suspect lots contained
04Shift performanceOEEPulseGoal: OEE losses explained
05Maintenance planPredictMaintGoal: Planned vs breakdown work
06Energy per partEnergyWatchGoal: Energy waste found
AI agents

12 manufacturing AI agents

Each one a specialist, each one working under your rules.

44 · Manufacturing

MachineWatch

Watches every machine's vibration, heat, current and cycle time, and raises the alarm before a small fault becomes a breakdown.

45 · Manufacturing

RootCauseIQ

Finds the likely root cause of every breakdown from alarm codes, repair history and sensor trends, with the evidence.

46 · Manufacturing

FixDispatch

Sends the right technician to every breakdown in minutes, with the diagnosis and parts, and escalates if nobody responds.

47 · Manufacturing

PredictMaint

Plans maintenance by machine condition, not the calendar: brings jobs forward for worn machines and stretches them for healthy ones.

48 · Manufacturing

SpareSense

Makes sure the right spare part is on the shelf when the technician needs it, and frees cash tied up in parts nobody uses.

49 · Manufacturing

OEEPulse

Calculates OEE for every machine and shift, finds the biggest losses and makes sure every stop has a reason.

50 · Manufacturing

PlanSync

Moves production off a broken machine to the best free one within minutes, and warns early when a delivery date is at risk.

51 · Manufacturing

QualityLens

Checks every measurement against the drawing and SPC rules, and catches drift before parts go out of tolerance.

52 · Manufacturing

MaterialFlow

Gets material to the line before the job starts, flags shortages two days ahead and stops over-issue.

53 · Manufacturing

EnergyWatch

Finds energy waste per machine and per part: idle running, air leaks, and the slow creep that often signals wear.

54 · Manufacturing

LotTrace

Links every lot to the machine, hours and material it came from, and contains suspect lots before they reach the customer.

55 · Manufacturing

ShiftBrief

Writes the shift handover from live plant data, so no breakdown, hold or open job is lost between shifts.

FAQ

Manufacturing: common questions

Plain answers.

Can AI agents control our machines?

No. DOS agents read machine data (vibration, temperature, current, cycle time, alarms) and never write to a machine or PLC. When a machine should stop, the agent asks your shift supervisor with the evidence.

Do we need new sensors?

Usually not to start. Most plants already have PLC tags, a SCADA or historian, energy meters and a maintenance system. DOS reads what you have; extra vibration sensors on critical machines improve early warnings.

How does it find the root cause?

It matches each breakdown with past repairs on the same machine type and alarm code, reads the sensor trend before the stop, and ranks the likely causes with a confidence score and the past jobs behind it.

Which systems does it connect to?

OPC UA or MQTT through a plant gateway, historians, MES, maintenance systems (CMMS), ERP and energy meters, through exports, views or events.

How fast can a plant start?

Most plants start with one line: machine monitoring, root cause and dispatch, in suggestion mode, so supervisors see every recommendation before anything is automatic. More lines and agents follow once the team trusts the results.

The AI agent platform for operations

Put AI agents to work.
Your rules. Your brand. Real time.

See your own process running with AI agents, with your people deciding what matters. Thirty minutes, live.